Products

Latest multi-purpose supernitride for machining steel, cast iron, steel, stainless, high temperature alloys

• Almost no residual stress: maximum adhesion especially under dynamic loads in the machining process
• Extremely smooth surface: smooth removal of the chips in the chip flute and wide range of applications
• Finest layer structure: very high ductility with very high level of hardness
• High oxidation resistance
• Can be used dry and wet with maximum productivity
• Extremely economical supernitride coating (value for money)
• Excellent for machining steel, cast iron, stainless steel and high-temperature alloys
• Recoatable at the highest level

(Heavy duty) supernitride, in particular for hard machining and machining workpiece materials that are difficult to machine

• Finest layer structure: extreme ductility with very high level of hardness
• Maximum oxidation resistance and red hardness
• Extremely good adhesion, therefore particularly suitable with extreme shear forces, for example when machining workpiece materials that are difficult to machine with lubrication
• Can be used dry and wet with maximum productivity
• Extremely smooth surface

Coating for machining aluminium, copper and titanium as well as alloys with these materials

• Extremely close-contour coating of sharp cutting edges
• High ductility with very high level of hardness
• Self-lubricating properties in use: low propensity to cold welding / built-up edge formation
• Extremely smooth surface for the smooth removal of the chips in the chip flute when milling and drilling
• Low level of friction of the margin lands (high surface finish of the bores)